Coatings, Ink Wetting Dispersants LD-110DA, LD-110EA
Coatings, Ink Wetting Dispersants LD-110DA, LD-110EA
(Better than BYK-110)
1. Overview
LD-110DA and LD-110EA are wetting and dispersing agents for solvent-based systems, which can deflocculate pigments through steric hindrance. Because of the small size of the flocculating pigment particles, high gloss and color strength can be obtained. It has higher cost performance than BYK-110.
LD-110DA and LD-110EA are suitable for dispersing inorganic pigments, especially titanium dioxide, and can greatly reduce the abrasive viscosity. Because of its anionic properties, it is suitable for acid catalytic systems (such as coil coatings). Electrostatic spraying of coatings containing inorganic pigments can reduce fog.
2.Technical Indicators
Chemical Composition: Copolymer Solution Containing Acidic Groups
Appearance (25 C): Light yellow or light brown viscous liquid
Active substance content (%): 50
Solvents: xylene and butyl acetate solvents
CHARACTERISTICS
Greatly reducing the viscosity of the system
Unflocculation of pigments and prevention of floatation and blooming
Improve gloss, stabilize tone, enhance color intensity
IV. Typical Applications
Industrial Coatings (for Epoxy Floor Coatings)
Automotive Coatings
Coil Coatings
Anticorrosive coatings
3.Recommended usage
It has wide applicability. According to the different dosage of different application systems, the dosage of inorganic pigments is 2%-10%, and the dosage of titanium dioxide is 2%-4%(depending on the specific surface area of pigments).
The dispersing agent is mixed in the base material, and then dispersed by adding pigments and fillers. It is suitable for any dispersion methods such as sand grinding, roll grinding, ball milling, etc.
4. Packaging and Storage
25KG or 50KG plastic bucket
Keep away from heat and fire. Store in a cool and ventilated environment at 0-40 C. Store in sealed condition.
